본문 바로가기 대메뉴 바로가기
윤경중 교수

Kyung Joong Yoon

INFO

  • 소속캠퍼스한국과학기술연구원 스쿨
  • 전공 나노-정보 융합
    (나노재료공학)
  • 연락처02-958-5515
  • 출신전공Manufacturing Engineering
  • 학위박사
  • 최종출신대학Boston University
  • 이메일

연구분야

고온에너지재료, 세라믹, 전기화학

High temperature energy materials, Ceramic, Electrochemistry

대표연구실적

-  Chan Seok, Jooho Moon, Mansoo Park, Jongsup Hong, Hyoungchul Kim, Ji-Won Son, Jong-Ho Lee, Byung-Kook Kim, Hae-Weon Lee, Kyung Joong Yoon, Low-temperature co-sintering technique for the fabrication ofmulti-layer functional ceramics for solid oxide fuel cells, Journal of the European Ceramic Society 36 (2016) 1417?1425 -  Kyung JoongYoon, Olga A. Marina, Highly stable dual-phase Y0.8Ca0.2Cr0.8Co0.2O3?Sm0.2Ce0.8O1.9 ceramic composite membrane for oxygen separation, Journal of Membrane Science 499 (2016) 301?306 -  Changwoo Jeong, Jong-Heun Lee, Mansoo Park, Jongsup Hong, Hyoungchul Kim, Ji-Won Son, Jong-Ho Lee, Byung-Kook Kim, Kyung Joong Yoon, Design and processing parameters of La2NiO4-based cathode for anode-supported planar solid oxide fuel cells (SOFCs), Journal of Power Sources 297 (2015) 370-378

논문(최근 5년)

-  Microstructure-polarization relations in nickel/gadolinia-doped ceria anode for intermediate-temperature solid oxide fuel cells[Ceramics international,2013-05-01] -  Electrochemical characterization of Ni-yttria stabilized zirconia electrode for hydrogen production in solid oxide electrolysis cells[Journal of power sources,2013-10-01] -  Determination of proton transference number of Ba(Zr0.84Y0.15Cu0.01)O3-δ via electrochemical concentration cell test[Journal of solid state electrochemistry ,2013-11-01] -  Influence of wet atmosphere on electrical and transport properties of lanthanum strontium cobalt ferrite cathode materials for protonic ceramic fuel cells[Solid state ionics,2013-11-01] -  Effect of sintering atmosphere on phase stability, and electrical conductivity of proton-conducting Ba(Zr0.84Y0.15Cu0.01)O3-δ[International journal of hydrogen energy,2014-04-01] -  Enhanced oxygen diffusion in epitaxial lanthanum-strontium-cobaltite thin film cathodes for micro solid oxide fuel cells[Energy & environmental science,2013-01-01] -  The potential and challenges of thin-film electrolyte and nanostructured electrode for yttria-stabilized zirconia-base anode-supported solid oxide fuel cells[Journal of power sources,2014-02-01] -  Thermo-mechanical stability of multi-scale-architectured thin-film-based solid oxide fuel cells assessed by thermal cycling tests[Journal of power sources,2014-03-01] -  Physical and Electrochemical Characteristics of Pulsed Laser Deposited La0.6Sr0.4CoO3-δ-Ce0.9Gd0.1O2-δ Nanocomposites as a Function of the Mixing Ratio[Journal of the Electrochemical Society,2014-01-01] -  Microstructure Refinement of Pulsed Laser Deposited La0.6Sr0.4CoO3-δ Thin-film Cathodes for Solid Oxide Fuel Cell[Metals and Materials International,2013-11-01] -  The Effect of Post-Annealing on the Properties of a Pulsed-Laser-Deposited La0.6Sr0.4CoO3-δ-Ce0.9Gd0.1O2-δ Nano-Composite Cathode[Journal of the Electrochemical Society,2013-09-01] -  High performance air electrode for solid oxide regenerative fuel cells fabricated by infiltration of nano-catalysts[Journal of power sources,2014-03-01] -  Fabrication of anode-supported protonic ceramic fuel cell with Ba(Zr0.85Y0.15)O3-δ-Ba(Ce0.9Y0.1)O3-δ dual-layer electrolyte[International journal of hydrogen energy,2014-08-01] -  Hydrogen production from water-splitting reaction based on RE-doped ceria-zirconia solid-solutions[International journal of hydrogen energy,2013-05-01] -  Degradation mechanism of electrolyte and air electrode in solid oxide electrolysis cells operating at high polarization[International journal of hydrogen energy,2013-02-01] -  Microstructural adjustment of Ni-BaCe0.9Y0.1O3-δ cermet membrane for improved hydrogen permeation[Ceramics international,2014-04-01] -  Effect of internal and external constraints on sintering behavior of thin film electrolytes for solid oxide fuel cells (SOFCs)[Ceramics international,2014-09-01] -  Role of Ceria-Zirconia Solid Solution with High Oxygen Storage Capacity in Cermet Anodes of Solid Oxide Fuel Cells[Journal of the Electrochemical Society,2014-06-01] -  Fabrication and characterization of all-ceramic solid oxide fuel cells based on composite oxide anode[Journal of power sources,2013-11-01] -  Optimization of current collection to reduce the lateral conduction loss of thin-film-processed cathodes[Journal of power sources,2013-05-01] -  Synthesis of nano-crystalline La1-xSrxCoO3-δ perovskite oxides by EDTA-citrate complexing process and its catalytic activity for soot oxidation[Applied catalysis A, General,2012-12-01] -  Ceria-based electrolyte reinforced by sol-ge technique for intermediate-temperature solid oxide fuel cells[International journal of hydrogen energy,2013-08-01] -  Structural optimization of (La, Sr)CoO3-based multilayered composite cathode for solid-oxide fuel cells[Journal of power sources,2013-04-01] -  Lattice-strain effect on oxygen vacancy formation in gadolinium-doped ceria[Journal of electroceramics,2014-02-01] -  Fabrication and characterization of Ba(Zr0.84Y0.15Cu0.01)O3-δ electrolyte-based protonic ceramic fuel cells[Ceramics international,2013-12-01] -  Electrochemical performance and long-term durability of a 200 W-class solid oxide regenerative fuel cell stack[International journal of hydrogen energy,2014-12-01] -  Facile fabrication of YSZ/GDC multi-layers by using a split target in pulsed laser deposition and their structural and electrical properties[Journal of electroceramics,2014-10-01] -  Highly Dense Mn-Co Spinel Coating for Protection of Metallic Interconnect of Solid Oxide Fuel Cells[Journal of the Electrochemical Society,2014-10-01] -  Specific considerations for obtaining appropriate La1 xSrxGa1yMgyO3d thin films using pulsed-laser deposition and its influence on the performance of solid-oxide fuel cells[Journal of power sources,2015-01-01] -  Synthesis, sintering and conductivity behavior of ceria-doped Scandia-stabilized zirconia[Solid state ionics,2014-10-01] -  Effect of Ba-deficiency on the phase and structural stability of (BaSr)(CeZr)O3-based proton conducting oxides[International journal of hydrogen energy,2015-09-01] -  Sandwiched ultra-thin yttria-stabilized zirconia layer to effectively and reliably block reduction of thin-film gadolinia-doped ceria electrolyte[Journal of the Ceramic Society of Japan,2015-04-01] -  Determination of Electronic and Ionic Partial Conductivities of BaCeO3 with Yb and In Doping[Journal of the Electrochemical Society,2015-05-01] -  Reactions and mass transport in high temperature co-electrolysis of steam/CO2 mixtures for syngas production[Journal of power sources,2015-04-01] -  Scale-up of Thin-film Deposition-based Solid Oxide Fuel Cell by Sputtering, a Commercially Viable Thin-film Technology[ JOURNAL OF THE ELECTROCHEMICAL SOCIETY,2016-04-01] -  Low-temperature co-sintering technique for the fabrication of multi-layer functional ceramics for solid oxide fuel cells[ JOURNAL OF THE EUROPEAN CERAMIC SOCIETY,2016-05-01] -  Impact of nanostructured anode on low-temperature performance of thin-film-based anode-supported solid oxide fuel cells[ JOURNAL OF POWER SOURCES,2016-05-01] -  High-performance and robust operation of anode-supported solid oxide fuel cells in mixed-gas atmosphere[INTERNATIONAL JOURNAL OF ENERGY RESEARCH,2016-05-01] -  High-performance thin-film protonic ceramic fuel cells fabricated on anode supports with a non-proton-conducting ceramic matrix[ JOURNAL OF MATERIALS CHEMISTRY,2016-05-01] -  The effect of fuel utilization on heat and mass transfer within solid oxide fuel cells examined by three-dimensional numerical simulations[ INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2016-06-01] -  Optical absorption and XPS studies of (Ba1-xSrx)(Ce0.75Zr0.10Y0.15)O3-δ electrolytes for protonic ceramic fuel cells[ CERAMICS INTERNATIONAL,2016-06-01] -  Record-low sintering-temperature (600 °C) of solid-oxide fuel cell electrolyte[ JOURNAL OF ALLOYS AND COMPOUNDS,2016-07-01] -  Sintering behavior and electrochemical performances of nano-sized gadolinium-doped ceria via ammonium carbonate assisted co-precipitation for solid oxide fuel cells[ JOURNAL OF ALLOYS AND COMPOUNDS,2016-10-01] -  Design and processing parameters of La2NiO4þd-based cathode for anode-supported planar solid oxide fuel cells (SOFCs)[Journal of power sources,2015-11-01] -  Highly stable dual-phase Y0.8Ca0.2Cr0.8Co0.2O3?Sm0.2Ce0.8O1.9 ceramic composite membrane for oxygen separation[Journal of membrane science,2016-02-01] -  Low-temperature sintering of Ba(Zr,Y)O3-based proton conducting oxides using BaO-CuO eutectic flux as sintering aid[Ceramics international,2016-06-01] -  Record-low sintering-temperature (600 ¡ÆC) of solid-oxide fuel cell electrolyte[Journal of alloys and compounds,2016-07-01] -  Low-temperature sintering of Ba(Zr,Y)O3-based proton conducting oxides using BaO-CuO eutectic flux as sintering aid[Ceramics international,2016-06-01] -  Optical absorption and XPS studies of (Ba1-xSrx)(Ce0.75Zr0.10Y0.15)O3-δ electrolytes for protonic ceramic fuel cells[Ceramics international,2016-06-01] -  고체산화물 연료전지(Solid Oxide Fuel Cell, SOFC) 개발 동향 및 저온 구동형 SOFC 연구 방향 소개[재료마당 = Trends in metals & materials engineering,2016-07-01] -  Constrained Sintering in Fabrication of Solid Oxide Fuel Cells[Materials ,2016-08-01] -  Catalytic Effect of Pd-Ni Bimetallic Catalysts on High-Temperature Co-Electrolysis of Steam/CO2 Mixtures[Journal of the Electrochemical Society,2016-08-01] -  The effect of fuel utilization on heat and mass transfer within solid oxide fuel cells examined by three-dimensional numerical simulations[International journal of heat and mass transfer,2016-06-01] -  Effects of mixing state of composite powders on sintering behavior of cathode for solid oxide fuel cells[Ceramics international,2017-10-01] -  Synthesis and conductivity behaviour of proton conducting (1-x)Ba0.6Sr0.4Ce0.75Zr0.10Y0.15O3-d-xGDC (x=0, 0.2, 0.5) composite electrolytes[Journal of the American Ceramic Society,2017-10-01]

특허(최근 5년)

-  후열처리된 복합체 공기극을 포함하는 고체산화물 연료전지 및 그 제조방법[2014-08-07] -  이중 전해질층을 포함하는 프로톤 전도성 고체 산화물 연료전지 및 유사 대칭성 적층 구조의 동시소성을 이용한 그 제조방법[2014-09-02] -  저온작동 고체산화물 연료전지용 밀봉재[2015-01-05] -  고체 산화물 재생 연료전지용 다공성 공기극 복합체, 이의 제조방법 및 이를 포함하는 고체 산화물 재생 연료전지[2015-07-01] -  고체 산화물 연료전지용 공기극의 제조방법 및 이를 이용한 고체 산화물 연료전지용 공기극[2015-05-15] -  분할 타겟 펄스 레이저 증착 장치 및 이를 이용한 초박막 다층구조 증착 방법[2015-03-09] -  고체산화물 연료전지 스택용 유리 복합체 밀봉재[2015-09-15] -  환원 방지막이 구비된 샌드위치 박막 구조의 전해질을 포함하는 고체 산화물 셀 및 이의 제조방법[2015-11-26] -  스피넬계 전도성 산화막이 코팅된 고체산화물 재생 연료전지용 금속 분리판, 이의 제조방법 및 이를 포함하는 고체산화물 재생 연료전지[2016-03-01] -  평판형 고체산화물 연료전지 스택용 밀봉재 및 이를 이용하는 연료전지 스택[2015-11-13] -  탄화수소계 연료 고체산화물 가역 연료전지용 전극촉매 및 그 제조방법[2015-11-26] -  수소이온 전도성 고체산화물 연료전지 및 이의 제조방법[2016-07-04] -  하이브리드 전기화학셀 및 그 제어 방법[2016-08-29] -  하이브리드 가역전기화학셀 및 그 제어 방법[2016-08-16] -  반응방지막을 포함하는 고온 고체산화물 셀, 이의 제조방법[2016-09-07]