본문 바로가기 대메뉴 바로가기
서진유 교수

Jin-Yoo Suh

INFO

  • 소속캠퍼스한국과학기술연구원 스쿨
  • 전공 나노-정보 융합
    (나노재료공학)
  • 연락처02-958-6805
  • 출신전공재료공학
  • 학위박사
  • 최종출신대학California Institute of Technology
  • 이메일

연구분야

금속재료, 내열강, 수소분리막, 수소취성

metallic materials, heat resistant steels, hydrogen membrane, hydrogen embrittlement

대표연구실적

-  Jin-Yoo Suh et al./Effect of hydrogen on the yielding behavior and shear transformation zone volume in metallic glass ribbons/Acta Materialia/2014 -  Jin-Yoo Suh et al./Direct measurement of hydrogen diffusivity through Pd-coated Ni-based amorphous metallic membranes/Journal of Membrane Science/2013 -  Jin-Yoo Suh et al./High-temperature tensile and creep deformation of cross-weld specimens of weld joint between T92 martensitic and Super304H austenitic steels/Materials Characterization/2014

논문(최근 5년)

-  Effect of Co on the degradation of the hydrogen permeability of Ni-Nb-Zr amorphous membranes[Metals and Materials International,2014-03-01] -  Microstructural analysis of dehydrogenation products of the Ca(BH4)2-MgH2 composites[Microscopy and Microanalysis,2013-10-01] -  Direct measurement of hydrogen diffusivity through Pd-coated Ni-based amorphous metallic membranes[Journal of Membrane Science,2013-07-02] -  Design of sustainable V-based hydrogen separation membranes based on grain boundary segregation[International Journal of Hydrogen Energy,2014-07-01] -  A semi-empirical methodology to predict hydrogen permeability in amorphous alloy membranes[Journal of membrane science,2014-12-01] -  Effect of hycdrogen on the yielding behavior and shear transformation zone volume in metallic glass ribbons[Acta materialia,2014-10-01] -  High-temperature tensile and creep deformation of cross-weld specimens of weld joint between T92 martensitic and Super304H austenitic steels[Materials characterization,2014-11-01] -  Hydrogen-induced hardening and softening of Ni?Nb?Zr amorphous alloys: Dependence on the Zr content[Scripta materialia,2014-12-01] -  Effect of Nb addition on Z-phase formation and creep strength in high-Cr martensitic heat-resistant steels[Materials characterization,2015-04-01] -  Microstructural evolution and creep-rupture life estimation of high-Cr martensitic heat-resistant steels[Materials characterization,2015-08-01] -  The role of hydrogen in hardening/softening steel: Influence of the charging process[Scripta materialia,2015-10-01] -  Development of high strength hot rolled low carbon copper-bearing steel containing nanometer sized carbides[Materials science & engineering. A, Structural materials : properties, microstructure and processing,2015-05-01] -  Development of nano-crystalline cold sprayed Ni-20Cr coatings for high temperature oxidation resistance[Surface & coatings technology,2015-03-01] -  Hydrogen-induced decomposition of Cu-Zr binary amorphous metallic alloys[Journal of alloys and compounds,2016-03-01] -  Reassessing the atomic size effect on glass forming ability: Effect of atomic size difference on thermodynamics and kinetics[Intermetallics,2016-02-01] -  CALPHAD-based alloy design for advanced automotive steels - Part I: Development of bearing steels with enhanced strength and optimized microstructure[CALPHAD, computer coupling of phase diagrams and thermochemistry,2016-09-01] -  Hydrogen-induced softening in nanocrystalline Ni investigated by nanoindentation[ PHILOSOPHICAL MAGAZINE,2016-12-01] -  Effect of oxygen and nitrogen on microstructure and mechanical properties of vanadium[ MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2016-10-01] -  Spherical nanoindentation creep behavior of nanocrystalline and coarse-grained CoCrFeMnNi high-entropy alloys[ ACTA MATERIALIA,2016-05-01] -  Enhanced high temperature hydrogen permeation characteristics of V-Ni alloy membranes containing a trace amount of yttrium[ SCRIPTA MATERIALIA,2016-04-01] -  Effect of preexisting plastic deformation on the creep behavior of TP347 austenitic steels[ MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2016-01-01] -  Effect of aging treatment on microstructure and intrinsic mechanical behavior of Fe-31.4Mn-11.4Al-0.89C lightweight steel[ JOURNAL OF ALLOYS AND COMPOUNDS,2016-01-01] -  Hydrogen embrittlement in high interstitial alloyed 18Cr10Mn austenitic stainless steels[ INTERNATIONAL JOURNAL OF HYDROGEN ENERGY,2015-10-01] -  Nanomechanical behavior and structural stability of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion[ JOURNAL OF MATERIALS RESEARCH,2015-09-01] -  Work-hardening and plastic deformation behavior of Ti-based bulk metallic glass composite with bimodal sized B2 particles[ INTERMETALLICS,2015-07-01] -  Micro-to-nano-scale deformation mechanisms of a bimodal ultrafine eutectic composite[SCIENTIFIC REPORTS,2014-09-01] -  Unraveling the origin of strain-induced precipitation of M23C6 in the plastically deformed 347 austenite stainless steel[ MATERIALS CHARACTERIZATION,2014-08-01] -  High-temperature creep behavior and microstructural evolution of an 18Cr9Ni3CuNbVN austenitic stainless steel[ MATERIALS CHARACTERIZATION,2014-07-01] -  Phase dependent magnetic properties of Ni-Au alloy nanowires[ MATERIALS LETTERS,2014-02-01] -  Effective thermal conductivity of MgH2 compacts containing expanded natural graphite under a hydrogen atmosphere[ INTERNATIONAL JOURNAL OF HYDROGEN ENERGY,2014-01-01] -  Atomistic simulation of hydrogen diffusion at tilt grain boundaries in vanadium[ METALS AND MATERIALS INTERNATIONAL,2013-11-01] -  Effect of vanadium addition on the creep resistance of 18Cr9Ni3CuNbN austenitic stainless heat resistant steel[ JOURNAL OF ALLOYS AND COMPOUNDS,2013-10-01] -  Effect of Nb and Cu on the high temperature creep properties of a high Mn-N austenitic stainless steel[ MATERIALS CHARACTERIZATION,2013-09-01] -  Prediction of hydrogen permeability in V-Al and V-Ni alloys[ JOURNAL OF MEMBRANE SCIENCE,2013-03-01] -  Strengthening mechanism of hot rolled Ti and Nb microalloyed HSLA steels containing Mo and W with various coiling temperature[ MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2013-01-01] -  Hydrogen back-pressure effects on the dehydrogenation reactions of Ca(BH4)2[ JOURNAL OF PHYSICAL CHEMISTRY C,2012-12-01] -  Nanometer-scale phase separation and formation of delta ZrH2 in Cu-Zr binary amorphous alloys[Journal of alloys and compounds,2017-10-01]

특허(최근 5년)

-  내산화성 페라이트계 스테인리스강, 그 제조 방법 및 이를 사용한 연료 전지 접속자[2014-12-05] -  분리막용 바나듐계 수소투과합금, 그 제조 방법 및 이를 이용한 분리막의 사용 방법[2015-02-09] -  열전도도 및 내산화성이 우수한 마그네슘계 수소 저장 재료 제조 방법[2015-08-13] -  Zr을 포함하는 다공체의 제조방법[2015-07-14] -  거친 표면으로부터 비정질 금속 재료 내부의 균일성 및 대략적인 밀도 측정을 극소각중성자산란(USANS)을 이용하여 측정하는 방법[2016-11-24] -  산소 및 질소의 함량을 제어한 체심입방정계 금속합금 수소분리막 및 이의 제조 방법[2016-11-08] -  구리 또는 니켈 금속이 석출한 지르코늄 수소화물 또는 지르코늄 산화물 분말 및 이의 제조 방법[2017-01-11] -  엔진/변속기용 피로내구성 증대 신베어링강[2016-12-06]